Diamond Mesh Lath

diamond lath mesh

Yo: Empresas de productos Buscando: Empresas de productos

1/4" Galvanized Diamond Mesh Lathe, 27inch x 97 inch, 2.5 lbs
Self fur dimpled Diamond Metal Lath for wall stucco keying
V grooved Expanded Metal Lath
Diamond Hole Expanded Mesh Strip Lath, in 6" for doors and windows corner reinforcement

1/4" Galvanized Diamond Mesh Lathe
Hot dipped zinc covered expanded metal lathing wire, 1/4 inch diamond hole, in 27inch x 96 inch

Sheet size: 27" x 96"
Specification:
3.50 Pounds/Square Yard
Materials: Hot dipped galvanized steel sheets.

V Groove Self- Furring Diamond Mesh Lath
Diamond Expanded Metal Lathe for dimple-patterned, self-furring plaster base

Diamond mesh lathe wire
Material: Zinc coated carbon steel
Weight: 1.75lbs, 2.51lbs, 3.4lbs, 3.5lbs
Self furred diamond mesh lath is made to be used over solid surfaces to be furred approximately ¼ inch away from the wall to allow for the proper behind the lath. Designed with a surface studded in dimples or embossed “V” groove that provide the required ¼ inch of furring.

Expanded Mesh Rib Lath Coils
Galvanized Expanded Steel Mesh Coils for Plastering and Stucco Reinforcing
Galvanised expanded coil mesh, in 100mm x 15m length, 150mm coil wdith x 30m length.
Opening: Diamond
For plastering back lathing

Expanded Metal Sheet Diamond Mesh Lath
Galvanized carbon steel mesh expanded metal for diamond metal lathe production
Expanded metal lath sheet
Self furring design
Specification: 0.5 mm. thickness
Mesh size 5.7 x 11.2 mm.
Supplied in 1x10 m / roll
Finished sheet in 700x2500mm
For Thailand market

25x25mm Galvanized Expanded Metel Lath
Expanded Metal Lath
Mesh pattern: Diamond hole
Opening : 25 X 25 MM
Wire Diameter : Ø 1.6 MM
Width : 1.2 M x Length : 30 M
Tensile Strength : 415 - 427 N/mm2
Elongation : 21 - 26 %
Coating Thickness : 100 - 120 GSM Coating
Paper backed
For Saudi Arabia market